PRODUCT DESCRIPTION

Live vehicle data in a clean, customisable display. Fully assembled in a 3D-printed case, each kit includes one standalone gauge, an ELM327 OBD2 adapter and the supplied wiring. No assembly, software flashing or phone is required.

This is a standalone unit—not a linked multi-gauge setup.

Simple installation

Mount the gauge, connect the supplied harness’s red wire to a suitable fused, ignition-switched power supply and black wire to ground, following the included instructions. Plug the ELM adapter into your OBD2 port, switch on the ignition and let the gauge connect.

Before you order

• For compatible petrol and diesel vehicles built after 2004 with OBD2/EOBD support.
• Not every listed parameter works on every car. Available readings and refresh speeds depend on your vehicle’s ECU. Boost, oil temperature and DPF data are particularly vehicle-dependent.
• Horsepower and torque readings labelled “estimated” are calculations, not dyno measurements.
• Cases are 3D printed; visible layer lines and minor finish variations are normal.

If a particular reading is essential, contact us with your vehicle details before purchasing. Vehicle-specific mounting and power connections are required.

Strictly for off-road and closed-course use only—not for use on public roads. Does not replace factory instruments or warning systems.